Tingley V81832.S-M ANSI 107 CLASS 2 & ASTM F1506 FR SAFETY VESTS - Fluorescent Yellow-Green FR Solid - FR Reflective H Pattern - 2 Mic Tabs

    By Tingley | Mfr#: V81832.S-M | Tiger#: TS27350
    ANSI 107 CLASS 2 & ASTM F1506 FR SAFETY VESTS - Fluorescent Yellow-Green FR Solid - FR Reflective H Pattern - 2 Mic Tabs TINV81832
    • ANSI 107 CLASS 2 & ASTM F1506 FR SAFETY VESTS - Fluorescent Yellow-Green FR Solid - FR Reflective H Pattern - 2 Mic Tabs TINV81832
    • Interior 3 pocket configuration

    Highlights

    • Solid 55% modacrylic/45% cotton blend
    • Three 2” reflective stripes
    • Flame and electric arc resistant
    • Hook and loop front closure
    • 5 exterior and 3 interior pockets, 2 mic tabs
    • Fluorescent yellow-green
    • Choice of size S/M - 4XL/5XL
    • ASTM F1506 Arc rating 6.8 cal/cm²
    • NFPA 70E-HRC 1
    • ANSI/ISEA 107 Class 2
    More Product Details What's Included
    List Price: $100.55
    $64.00
    You Save: $36.55 - 36%
    • Product Options
    Ships Out Within: 5 - 7 Business Days

    This vest is available in sizes S-M, L-XL, 2X-3X, 4X-5X. Click here to view a size chart.

    Overview for Tingley V81832.S-M ANSI 107 CLASS 2 & ASTM F1506 FR SAFETY VESTS - Fluorescent Yellow-Green FR Solid - FR Reflective H Pattern - 2 Mic Tabs

    This Surveyor’s vest is like a surveyor’s best friend. The vest literally provides access to all that a surveyor may need. With its High Visible FR material, reflective tape, 2 mic tabs, and its eight pockets you could be prepared to tackle any job.

    The best and most durable materials were chosen for this vest. The 6.5 oz. 55% modacrylic /45% cotton blend, is durable and provides a breathable stretch for the body. The vest is ANSI 170 class 2, level 2 compliant and flame resistant complying to the ASTM F1506 and NFPA 70E – HRC Category 1 standards. Stitching for the garments seams are done with 100% aramid thread, delivering total flame resistance.

    Reflective tape is heat sealed to the vest using a harness layout in the front and an “H” band layout in the back. The surveyor’s vest has an Arc rating = 6.8 cal/cm². Closure on the surveyor’s vest is quick and easy with the FR hook & loop that works just like Velcro™. A size label, with the ANSI 107, ASTM F1506 and NFPA 70E compliance statements and the care instructions can be found on the inside of the surveyors vest.

    Perhaps one of the greatest features that this surveyor vest has to offer is its pockets. With 3 interior pockets, five exterior pockets and two mic. tabs, this vest is really loaded with room for everything. The interior pockets are placed on the interior lower right and left of the vest, with an additional “pen” pocket on the lower left side too. The exterior boasts 5 pockets; a cell phone pocket with a closing flap placed on the upper right side. The upper left side has a pocket with four dividers and a plain pocket is located underneath the divided pocket. Additionally a pocket with a flap closure is located on the lower right and left sides of the vest. Communication is easy with the two mic. tabs placed below the shoulders.

    This vest is fantastic and is available in sizes S-M, L-XL, 2X-3X, 4X-5X. Click here to view a size chart; the chart will assist you with choosing a size that’s perfect for you.

    Interior three pocket configuration