| Dimensions | 12.99" L x 8.35" W x 5.12" H |
| Weight | 9 lbs |
| Display | 20 character x 4 row alphanumeric LCD |
| Data Entry | Keyboard selection of mode, waveform etc.; value entry direct by numeric keys or by rotary control |
| Stored Settings | Up to 9 complete instrument setups |
| Power | 100 V ac, 110 to 120 V ac or 220 to 240 V ac +/– 10 %, 50/60 Hz ac by internal adjustment; 30 VA max. |
| Operating Range | 41 °F to 104 °F, 20-80% RH (+5 °C to 40 °C) |
| Storage Range | -4 °F to 140 °F (-20 °C to + 60 °C) |
| Warranty | 3-year |
| |
| Frequency Range | 0.1 mHz to 10 MHz |
| Frequency Resolution | 7 digits or 0.1 mHz |
| Frequency Accuracy | Typically < ± 10 ppm for 1 year, 18 °C to 28 °C |
| Frequency Tempco. | Typically < ± 10 ppm for 1 year, 18 °C to 28 °C |
| Sinewave Distortion | < –60 dBc to 20 kHz, < –50 dBc to 300 kHz, < -35 dBc to 10 MHz |
| Sinewave Spurii | Non -harmonically related spurii typically <- 60 dBc to 10 MHz |
| Squarewave Rise & Fall Times | < 22 ns |
| Triangle Linearity Error | < 0.5 % to 30 kHz |
| Positive & Negative Ramp Linearity Error | < 0.5 % to 30 kHz |
| Positive and Negative Pulse Rise & Fall Times | < 22 ns |
| Multi-Level Squarewave Rise & Fall Times | < 22 ns |
| No. of Arbitrary & Complex Samples | 1024 10 bit samples |
| Arbitrary & Complex Noise | Wideband noise with variable amplitude and offset |
| Symmetry Range | Sine — 1 % to 99 % at all frequencies; Other waveforms — 1 % to 99 % to 30 kHz, 20 % to 80 % to 10 MHz |
| Symmetry Resolution | 0.1 % |
| |
| Output Impedance | 50 ? or 600 ? switchable |
| Amplitude | 5 mV to 20 V pk-pk open circuit (2.5 mV to 10 V into 50 ?/600 ?) |
| Accuracy | Typically ±3 % ±1 mV at 1 kHz into 50 ?/600 ? |
| Flatness | ±0.2 dB to 500 kHz; ±1 dB to 10 MHz |
| Pulse Aberrations | <5 %+ 2 mV |
| DC Offset | ± 10 V from 50 ?/600 ? offset plus signal peak limited to ± 10 V from 50 ?/600 ? |
| Resolution | 3 digits or 1 mV for both amplitude and offset |
| |
| Amplitude Modulation Carrier Frequency | 0.1 mHz to 10 MHz |
| Amplitude Modulation Carrier Waveforms | All |
| Amplitude Modulation Depth | 0 to 100%, resolution 1% |
| Amplitude Modulation Internal Source | 1 kHz fixed sinewave or 0.005 Hz to 50 kHz square wave |
| Amplitude Modulation External | See "VCA In" details |
| Frequency Shift Keying (FSK) Carrier Frequency | 0.1 mHz to 10 MHz |
| Frequency Shift Keying (FSK) Carrier Waveforms | All |
| Frequency Shift Keying (FSK) Switch Repetition Rate | dc to 50 kHz internal, dc to 1 MHz external |
| Frequency Shift Keying (FSK) Switching Signal Source | Internal from keyboard or trigger generator. External from EXT TRIG input or remote interface. |
| |
| Trigger/Burst Carrier Frequency | 0.1 mHz to 10 MHz |
| Trigger/Burst Carrier Waveforms | All |
| Trigger/Burst Number of Cycles | 1 to 1,023 (resolution 1 cycle) or 0.5 to 511.5 (resolution 1/2 cycle) |
| Trigger/Burst Trigger Rep. Rate | dc to 50 kHz internal, dc to 1 MHz external |
| Trigger/Burst Source | Internal from keyboard or trigger generator. External from EXT TRIG input or remote interface |
| Gated Carrier Frequency | 0.1 mHz to 10 MHz |
| Gated Carrier Waveforms | All |
| Gated Trigger Rep. Rate | dc to 50 kHz internal dc to 1 MHz external |
| Gate Source | Internal from keyboard or trigger generator. External from EXT TRIG input or remote interface |
| Sweep Carrier Waveforms | All |
| Sweep Mode | Linear or logarithmic, single or continuous |
| Sweep Width | 0.1 mHz to 10 MHz |
| Sweep Time | 10 ms to 999 s (3 digit resolution) |
| Sweep Markers | 2 markers variable during sweep |
| Sweep Trigger Source | The sweep may be free run or triggered from: keyboard, EXT TRIG input, remote interface |
| Hop | Up to 16 hop waveforms can be defined in terms of function, frequency, amplitude, offset and duration |
| Start/Stop Phase Carrier Frequency | 0.1 mHz at least 1 MHz |
| Start/Stop Phase Carrier Waveforms | All |
| Start/Stop Phase Range | -360 to +360 degrees |
| Start/Stop Phase Resolution | 1 degree |
| Start/Stop Phase Accuracy | Typically 1 degree to 30 kHz |
| Trigger Generator | Internal source 0.005 Hz to 50 kHz squarewave adjustable in 20 us steps |
| |
| Aux Out | CMOS/TTL levels with symmetry and frequency of main output and phase of start-stop phase setting |
| Trig/Sweep Out | Multi-function output depending upon mode. Except in sweep mode, the output is that of the trigger generator at CMOS/TTL levels from 1 k?. In Sweep mode the output is a 3-level waveform, changing from high (+4 V) to low (0 V) at the start of sweep, with narrow 1 V pulses at each marker point. |
| |
| Ext Trig Frequency Range | DC to 1 MHz |
| Ext Trig Signal Range | TTL (1.5 V) threshold; maximum input ±10 V |
| Ext Trig Min. Pulse Width | 50 ns |
| VCA In Frequency Range | DC - 100 kHz |
| VCA In Signal Range | 2.5 V for 100% level change at maximum output |
| VCA In Input Impedance | Typically 6 kiloOhms |
| |
| Clock In/Out | TTL/CMOS threshold levels; output impedance typically 50 ? as an output |
| Sync Out | TTL/CMOS logic levels from typically 50 KiloOhms |
| |
| RS-232 | Variable Baud rate, 9600 Baud maximum, 9-pin D-connector |
| IEEE-488 | Conforms with IEEE4881.1 and IEEE488.2 |
| |