Spectra Geospatial 92673-10 UHF Kit for SP60/SP85 GNSS Receiver

The UHF Kit gives you the option to outfit the SP60 and SP85 GNSS Receivers with an internal radio to turn them into a standalone, radio-based RTK base/rover system. This gives you full control over where and when to install and operate the receivers.

Please note that you will need two UHF kits to implement a complete radio-based RTK base/rover system. One kit for the base side and the other on the rover side. You will also need two UHF whip antennas – one for the base and one for the rover.

When used with a UHF Kit, your receiver is recommended to be powered with an external 12-V battery with a higher capacity, especially if it’s going to be used for extended hours without interruption.

The full procedures of installing and configuring the radio module are discussed in the GNSS user manual.

Note: UHF radio is not available in Japan.

• Optional kit for SP60/SP85 GNSS Receivers
• Equips GNSS receivers with an internal radio
• Includes UHF module, base pole extension, coaxial adapter cable, rover range pole, soft bag for range pole, and screwdriver

• 1 x UHF Module (410-470 Mhz 2W TRx)
• Base pole extension, 25 cm (9.5”) long (95672)
• Coaxial adapter cable (96845)
• Fiberglass rover range pole, 1.75 m (5.74 ft) long (106815)
• Soft bag for range pole (95860-10)
• T25 L-shaped Torx Screwdriver
• User Manual