Equipped with 1,800 RPM engine, the Briggs & Stratton Three-Phase 60kW Standby Generator offers reliable backup power when needed the most. With a liquid cooled engine, it has limited temperature rise on the alternator resulting in longer product life and budget-friendly operation. Running 60,000 watts, it helps eliminate business losses from power outages. It is also available in multiple voltage configurations and controller options.
To ensure electronics are safely powered, the Briggs & Stratton Three-Phase 60kW Standby Generator comes with a user-friendly control panel to conveniently monitor diagnostic conditions, display system fault codes and sets weekly exercise cycle. This generator is quieter due to its low-speed engine and has a sound rating of 68 dBA. It is fuel-efficient too, with a fuel consumption of 233 ft³/hr (LP) and 512 ft³/hr (NG) at 50% load.
Constructed of a durable aluminum enclosure this generator is protected against extreme weather conditions and corrosion. It also comes with a block heater to keep the engine warm for easy starting in cold weather. It is easy to maintain with a convenient internal swing open doors allowing easy access to the engine. The Briggs & Stratton Three-Phase 60kW Standby Generator is listed and rated by cUL 2200 and CSA, CARB, NEMA, and EPA compliant. It comes backed by 5-year parts, labor, and travel limited warranty.
Configuration Options
The Briggs & Stratton 3-Phase 60kW Standby Generator is available in different voltage and controller. Please choose from the menu above.
- 076161: 120/208V with InteliNano Controller
- 076163: 120/240V with InteliNano Controller
- 076165: 277/480V with InteliNano Controller
The InteliNano controller is a single gen-set regulator used in prime power applications. It uses up to three analog inputs when shared with binary inputs and up to six binary inputs if one binary input is shared with a binary output. It helps in measuring three-phase generators and can store up to ten event logs.
- 076361: 120/208V with InteliLite Controller
- 076363: 120/240V with InteliLite Controller
- 076365: 277/480V with InteliLite Controller
The InteliLite controller is a compact gen-set controller for a single gen-set operating in standby or prime power modes. This controller offers a plug-in and CAN bus extension modules capability, as well as fuel theft protection and total fuel consumption monitoring. It offers true-RMS measurements and supports Dual Mutual Standby (Dual AMF) and has a magnetic pickup input.
Item Number |  076161 | 076163 | 076165 | 076361 | 076363 | 076365 |
Wattage
|
62 kW (LP) or 55 kW (NG)
|
62 kW (LP) or 55 kW (NG)
|
62 kW (LP) or 55 kW (NG)
|
62 kW (LP) or 55 kW (NG)
|
62 kW (LP) or 55 kW (NG)
|
62 kW (LP) or 55 kW (NG)
|
Amps
|
215 (LP) or 191 (NG)
|
187 (LP) or 166 (NG)
|
93 (LP) or 83 (NG)
|
215 (LP) or 191 (NG)
|
187 (LP) or 166 (NG)
|
93 (LP) or 83 (NG)
|
Voltage
|
120/208
|
120/240
|
277/480
|
120/208
|
120/240
|
277/480
|
Breaker
|
225
|
300
|
100
|
225
|
300
|
100
|
Controller
|
InteliNano
|
InteliNano
|
InteliNano
|
InteliLite
|
InteliLite
|
InteliLite
|