Seco 2072-001 Adjustable Tilt Stainless Steel Monument Adapter

    By Seco | Mfr#: 2072-001 | Tiger#: TS11987
    Adjustable Tilt Monument Mounts SEC2072
    • Adjustable Tilt Monument Mounts SEC2072
    • Item thumb
    • Item thumb
    • Item thumb

    Highlights

    More Product Details
    List Price: $32.50
    $24.38
    You Save: $8.12 - 25%
    • Product Options
    Ships Out Within: 14 - 21 Business Days

    California Proposition 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

    Overview for Seco 2072-001 Adjustable Tilt Stainless Steel Monument Adapter

    SECO’s new #2072-Series 303 stainless steel adapters are the perfect link between your GPS antenna and mast for your network antenna solution.

    The brass 5/8 x 11 male stud is removable and adjustable in azimuth. It is held in location by two set screws.

    The adapters are leveled by three adjusting screws with a tilt range of +/- 7 degrees.

    The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm).

    The height below the brass 5/8 x 11 stud to the shoulder is 0.463 inches (1.18 cm).

    The #2072-Series’ female base is threaded to match the male pipe used.

    The axis height is engraved on the outside of the monument.

    Topcon Antenna GR3-1A users, be sure to order any of these monument adapters and extension #2072-001. The extension adds 1.00-in (2.54-cm) to the height, which enables easy access to cabling.

    Number:

    For Use With:

    Special Adapter:

         

    2072-001

     

    Use with Topcon GR3-1A Antenna

         

    2072-30

    MPT 1.5 x 11.5-inch pipe TPI

          

    2072-31

    MPT 2 x 11.5-inch pipe TPI

          

    2072-32

    MPT 3.5 x 8-inch pipe TPI

          

    2072-33

    Male 5/8 x 11 threads