| Imaging Detector | FLIR LeptonTM; Micro-bolometer Focal Plane Array (FPA) |
| Thermal Image Resolution | 60 x 80 pixels / 0.1°F (0.1°C) |
| Sensitivity | 150mK |
| Field of View | 50.0° x 38.6° (vertical x horizontal) |
| Color Palettes | Programmable: Iron, Rainbow, and Gray scale |
| Image Display | 0~6000 |
| Image Frame Rate | 9Hz |
| Temperature Measurement | -13°F ~ +302°F (-25°C ~ +150°C) |
| Temperature Range | -13°F ~ +302°F (-25°C ~ +15 |
| Temperature Distance to Spot Ratio | 30:1 |
| Temperature Accuracy | 5.4°F (±3°C) or ± 3% of reading; whichever is greater (after 2-minute warm-up period) |
| Spectral Response | 8 to 14µm |
| Temperature Targeting | Continuous |
| Emissivity Settings | 4 presets plus a custom setting (0.10 to 0.99) |
| |
| AC/DC Voltage | 1000V |
| VFD AC Voltage | 1000V |
| LoZ Mode AC Voltage | 1000V |
| LoZ Mode DC Voltage | 1000V |
| DC Current | 600.0A |
| AC Current | 600.0A |
| VFD AC Current | 600.0A |
| Inrush AC Current | 600.0A |
| Inrush AC Current Threshold | Min 0.5A Integration Time 100ms |
| Frequency | 60.00kHz |
| Resistance | 6000O |
| Continuity | 6000O |
| Capacitance | 1000µF |
| Diode | 1.5V |
| |
| Display Type | FLIR LeptonTM; Micro-bolometer Focal Plane Array (FPA) |
| Jaw Opening | 1.38 in. (35 mm) |
| Category Rating | CAT IV-600V, CAT III-1000V |
| Power Requirements | 4 × 1.5 V AAA alkaline batteries |
| Battery Power | Clamp mode: Approx. 10 hours; IGMTM Mode 3 hours (with alkaline batteries and work light off) |
| Battery Type | AAA alkaline batteries |
| Drop Test | 6.6 ft. (2 meters) |
| Standard Certifications | UL |
| Agency Approvals | CE, RCM, and KC (MSIP-REI-FS5-CM174) |
| Warranty | 10 yrs on product and detector |
| |
| Relative Humidity | 0~80% RH (batteries not installed) |
| Air Temperature | 14 to 50°F (-10 to 10°C) (non-condensing) |
| |