Superior high frequency (480 kHz) performance.  Pipehorn is the best tool in the industry when direct connect is not possible, and on the toughest conductors: coated iron pipes with insulated joints, unenergized power (street/parking lot lights), worn-out tracer tape & wire, short side services & stub-outs, concentric neutrals, and fiber.  Nothing sweeps areas for un-marked utilities like a Pipehorn.

Simultaneous conductive transmission of both high (480 kHz) and low (9 kHz) frequencies for congested areas and for long distance locates (800-HL).  Check either signal with the flick of a switch.

No more air broadcast on high frequency conduction. Better signals on the worst conductors!

Fast-response signal strength meter and sharp audio tone for precise pinpointing.

Watertight  reinforced receiver wand.  More durable than ever.

All weather / high impact ABS housing on transmitter.  Audio tone indicates battery strength and good connection. Low profile (wont tip over).  Bright yellow (easier to see).

Lightweight, space saving carry bag.

Two models available!  - A single high-frequency unit (480 kHz) and a dual frequency unit with both 480 kHz and 9 kHz for all of your locating needs.

Transmitter
Frequencies:   480 kHz and 9 kHz (model dependant)

Modes:   Inductive & Conductive

Battery:   8 "C" alkaline batteries
On/Off indicator

Battery Life Indicator

Good Signal Indicator

Receiver
Output: Signal strength meter and audible, built in speaker
Gain: Smart Control™ (semi-automatic)
Battery: Two 9-volt
Weight:   3.4 lbs. (1.5 kg)

Standard Accessories:
Conductive Cables 
Extension Sweep Handle
Ground Rod
Padded Carrying Bag