The Pacific Laser Systems HLE 1000 Rotary Laser Level 60569 is an exterior self-leveling rotary laser ideal for concrete forms and horizontal layout. It has an accuracy of 3/32 inches at 100 feet and a range of up to 1,000 feet when used with the included laser receiver.
Dual Slope Functionality
The HLE 1000 has four arrows on the center of the keypad that are used to adjust the x and y slope of the red laser beam. You can easily move it up, down, right or left as needed. The laser rotates at 1,000 rpms (rotations per minute). You can also turn off the automatic self-leveling to carry out manually leveling, if necessary.
This construction laser has an Automatic Drift System that ensures it remains in place. By simply pushing the TILT button for a few seconds, the level locks will stop scanning and flash a red light if it is disturbed.
Long Lasting Power
The PLS HLE 1000 has a power light that notifies you when it is ready to use. When battery power is low, the light blinks to let you know that the batteries need to be recharged. It provides up to 20 hours of use and includes 4 C alkaline batteries, a NiMH rechargeable battery pack, and a charger.
IP65 Protection Rating
The IP rating lets you know how protected an electrical tool is from the elements, such as dust and water. This HLE 1000 rotary laser is completely dust-tight, and even after 3-minutes of direct water jet splashes, the laser construction tool will not be affected.
The PLS HLD 1000 Laser Receiver
The HLD 1000 laser detector senses beams at long distances and enables the laser to reach its full 1,000-foot range. It has 2 LCD displays, precise and rough accuracies, and an audible alert that confirms detection of the laser.
This laser receiver automatically powers off after approximately twenty minutes of non-use. It is a lightweight and includes a rod clamp, a 9V battery, and a 1 year limited warranty.
This Pacific Laser Systems rotary laser comes with an infrared remote control that works with the laser from up to 70 feet away. There are 5 keys on its panel that match the keypad of the level. When any of those keys are pressed, a light will blink once, confirming that the remote signal is being sent.
This PLS construction laser 1000 is ideal for basic outdoor horizontal slope projects, such as large pads, concrete forms and elevations. It comes with a carrying case, user manual, and a 3 year limited warranty.